ARDUINO® MKR WIFI 101056.52€/ gab.Cena ieskaitot PVN 21%
|
The MKR WIFI 1010 is a significant improvement on the MKR 1000 WIFI. It's equipped with an ESP32 module made by U-BLOX. This board aims to speed up and simplify the prototyping of WiFi based IoT applications thanks to the flexibility of the ESP32 module and its low power consumption.
Product basic info
Primary colours: Blue
Additional colours: Black
Depth unit: 25 mm
Width unit: 61.5 mm
Weight unit: 32 g
Material: Epoxy
Technical data
Operating voltage: 3.3 V
Analog input pins: 7
Analog input pins type: ADC 8/10/12 bit
Analog output pins: 1
Analog output pins type: DAC 10 bit
Built-in LED's: 6
Clock speed: 48 MHz
Clock speed RTC: 32768 kHz
DC current per i/o pins: 7 mA
External interrupts: 10
External interrupts type: 1, 16/A1, 17/A2, 4, 5, 6, 7, 8, 9
Flash memory: 256 kB
I2C: 1
PWM pins: 13
PWM pins type: 1, 10, 12, 18/A3, 19/A4, 2, 3, 4, 5, 6, 7, 8
Radio module: u-blox NINA-W102
Secure element: ATECC508
SPI: 1
SRAM: 32 kB
Supported battery: Li-Po Single Cell, 3.7V, 1024mAh Minimum
Microcontroller: SAMD21 Cortex®-M0+ 32bit low power ARM® MCU
UART: 1
Connections
Digital I/O pins: 8
IT connections
USB type: Full speed USB device and embedded host
Power supply
Input voltage rating range: 5 V
(EN)
Vienības svars: | 0.021 kg |
---|---|
Minimālais pasūtījums: | 1 |