DC LAB SWITCHING MODE POWER SUPPLY 0-30 VDC / 0-20 A MAX WITH LCD DISPLAY310.14€/ gab.Cena ieskaitot PVN 21%
|
Our high-quality lab power supplies operate in both constant voltage and constant current mode. Our lab power supplies effortlessly switch to Constant Current mode when overloaded, providing a constant maximum output. If a short circuit occurs, you don't have to worry, because our power supplies are equipped with automatic current limiting (unless you have set a lower current value).
Product basic info
Instruction manual languages: Dutch, English, French, German, Polish, Portuguese, Spanish
Primary colours: Grey
Additional colours: Grey
Additional detailed colours: Dark grey
Depth unit: 336 mm
Height unit: 87 mm
Width unit: 214 mm
Weight unit: 2.7 kg
Material: Steel
Additional material: ABS, Aluminium, PP (Polypropylene), PVC (polyvinyl chloride)
Physical properties
Display type: LCD
Electrical data
Fuse type: T 4 A ( slow ) 250 V
Power factor: 0.61
Electrical protection: Current limiting
Output current rating range: 0-20 A
Ripple voltage peak to peak: Output connector type: IEC 1010
Technical data
Pollution degree: 2
Measurement category: III
Number of current outputs: 1
Number of voltage outputs: 1
Environmental data
Operating temperature range: 5-40 °C
Operational properties
Maximum operating altitude: Maximum relative humidity: Electrical connections
IEC connector: C13 (IEC), C14 (kettle)
Mains plug type: Type E/F (France/Germany)
Power supply
Input frequency rating: 50 Hz
Power consumption: 840 W
Input voltage rating VAC: 230 V
Output voltage rating VDC range: 0-30 V
Input current rating VAC: 4.3 A
(EN)
Vienības svars: | 3.518 kg |
---|---|
Minimālais pasūtījums: | 1 |
Ir pieejams: 72 242.08 € -+ |
Ir pieejams: 12 13.81 € -+ | Ir pieejams: 13 12.83 € -+ |