DIGITAL MULTIMETER - 24 RANGES / CAT II 700 V - CAT III 600 V / HOLD / AUTO POWER OFF / TEMP / 15 A AC & DC

Product basic info

Instruction manual languages: Dutch, English, French, German, Polish, Portuguese, Spanish

Primary colours: Black

Additional colours: Red

Depth unit: 37 mm

Height unit: 165 mm

Width unit: 85 mm

Weight unit: 215 g

Material: ABS

Physical properties

Cable length: 0.75 m

Display height: 26 mm

Display width: 61 mm

Display type: LCD

Backlight: No

Maximum digits display: 1999

Electrical data

AC current:

• basic accuracy: ± 1.5% of rdg ± 3 digits for 2 m - 20 mA range / ± 2.0% of rdg ± 3 digits for 200 mA range / ± 2.5% of rdg ± 5 digits for 15 A range
• overload protection: 0.5 A / 1000 V fuse in mA range, 15 A / 1000 V fuse in 15 A range
• frequency range: 40-500 Hz

AC voltage:

• basic accuracy: ± 0.8% of rdg ± 3 digits for 2 V - 200 V range / ± 1.2% of rdg ± 3 digits for 700 V range
• input impedance: 10 Mohm
• frequency range: 40-500 Hz
• maximum input: 700 V

Audible continuity measurement: Yes

Audible continuity: built-in buzzer sounds if resistance is less than 50 Ohm

Automatic polarity indication: Yes

DC current:

• basic accuracy: ± 1.2% of rdg ± 2 digits for 2 m - 20 mA range / ± 1.5% of rdg ± 2 digits for 200 mA range / ± 2.0% of rdg ± 3 digits for 15 A range
• overload protection: 0.5 A / 1000 V fuse in mA range, 15 A / 1000 V fuse in 15 A range

DC voltage:

• basic accuracy: ± 0.5% of rdg ± 2 digits for 200 mV - 200 V range / ± 0.8% of rdg ± 2 digits for 700 V range
• input impedance: 10 Mohm
• maximum input: 700 V
• overload protection: 700 V DC or AC rms

Diode test: Yes

Diode test specifications: test voltage: ± 3 V



Out of range indication: Yes

Temperature measuring Celsius specifications:

• basic accuracy:
  • ± 3 °C ± 1 digits for -50 °C ~ 150 °C range
  • ± 3 % of rdg ± 1 digits for 150 °C ~ 800 °C range
• overload protection: 0.5 A / 1000 V fuse

Transistor test: No

AC current measurements: 15 A, 2 mA, 20 mA, 200 mA

AC voltage measurements: 2 V, 20 V, 200 V, 700 V

Battery test measurements: 1.5 V, 9 V

DC current measurements: 15 A, 2 mA, 20 mA, 200 mA

DC voltage measurements: 2 V, 20 V, 200 mV, 200 V, 700 V

Resistance measurements: 2 kΩ, 2 MΩ, 20 kΩ, 20 MΩ, 200 kΩ, 200 Ω

Resistance specifications:

• basic accuracy: ± 1.0% of rdg ± 3 digits for 200 Ohm range / ± 1.0% of rdg ± 2 digits for 2 kOhm~200 kOhm range / ± 1.5% of rdg ± 3 digits for 20 MOhm range
• overload protection: 700 V DC or AC rms

Technical data

Safety rating: CAT II / 700 V, Cat III / 600 V

Voltage tester type: AC / DC

Automatic power-off function: Yes

Data-hold function: Yes

Battery test:

• basic accuracy: ± (5.0% rdg + 5 digits)
• overload protection: 0.5 A / 600 V fuse
• overload protection: 0.5 A / 1000 V fuse

Environmental data

IP rating: IPx0

Usage location: Indoor only

Operational properties

Measuring temperature range °C: -50-800 °C

Number ranges: 24

Range setting: Manual

Power supply

Batteries included: Yes

Number of batteries: 1

Low battery indicator: Yes

Battery composition: Alkaline

Battery IEC size: E (6LR61, 6LP3146, 6F22, 6KR61, 6HR61 ,1604A, 1604D, 1604LC, 7.2H5, 11604, 11604M, PP3, 9-volt, 006P, MN1604)

Included

Set contents: testlead probe (incl.): CAT III 1000V / CAT IV 600, 15 A, L = 75 cm



(EN)