DIGITAL MULTIMETER - CAT III 600 V / CAT IV 300 V - 1999 COUNTS

Product basic info

Instruction manual languages: Dutch, English, French, German, Polish, Portuguese, Spanish

Primary colours: Black

Additional colours: Red

Depth unit: 40 mm

Height unit: 190 mm

Width unit: 100 mm

Weight unit: 300 g

Material: ABS

Physical properties

Cable length: 0.75 m

Display height: 36 mm

Display width: 62 mm

Display type: LCD

Backlight: Yes

Maximum digits display: 1999

Electrical data

AC current:

• basic accuracy: ± (1.5% rdg + 3 digits), ± (2.0% rdg + 3 digits) for 200mA range, ± (2.5% rdg + 5 digits) for 15 A range
• overload protection: 500 mA / 600 V, 15 A / 600 V fuse
• frequency range: 40-500 Hz

AC voltage:

• basic accuracy: ± (0.8% rdg + 3 digits) , ± (1.2% rdg + 3 digits) for 600 V range
• input impedance: 1 megohm for 2 V range, 10 megohm for other ranges
• frequency range: 40-500 Hz
• maximum input: 600V DC or AC rms
• test A:
• test B: >= or >=

Audible continuity measurement: Yes

Audible continuity:

• built-in buzzer sounds if resistance is less than 50 Ohm
• test voltage: approx. 3 V

Automatic polarity indication: Yes

Capacity:

• basic accuracy: ± (2.5% rdg + 10 digits) for 2000 pF range, ± (2.5% rdg + 5 digits) for 20nF to 20 µF range, ± (5.0% rdg + 10 digits) for 200 µF range
• overload protection: 500 mA / 600 V fuse

DC current:

• basic accuracy: ± (1.2% rdg + 2 digits), ± (1.5% rdg + 2 digits) for 200mA range, ± (2.0% rdg + 3 digits) for 15 A range
• overload protection: 500 mA / 600 V, 15 A / 600 V fuse

DC voltage:

• basic accuracy: ± (0.5% rdg + 2 digits) , ±(0.8% rdg + 2 digits) for 600 V range
• input impedance: 10 MOhm
• maximum input: 600 V
• overload protection: 600 V DC or AC rms

Diode test: Yes

Diode test specifications: test voltage: approx. 3 V (reversed DC voltage)



Frequency:

• basic accuracy: ± (2.0% rdg + 5 digits)
• overload protection: 600 VDC or AC rms
• sensitivity: sine wave 0.5 V rms

Fuse type: F 0.50 A / 600 VAC / 500 VDC, 5 x 20 mm, breaking capacity 1 kA, F 15 A / 1000 VAC / 1000 VDC, 6 x 32 mm, breaking capacity 10 kA

Out of range indication: Yes

Temperature measuring Celsius specifications:

• -50 - 150 °C / 150 - 800 °C
• basic accuracy:
  • ± (3 °C + 3 digits) for -50 - 150 °C range
  • ± (3 % + 3 digits) for 150 - 800 °C range
• overload protection: 500 mA / 600 V fuse
• NiCr-NiSi sensor
• K thermocouple probe: included

Transistor test: No

AC current measurements: 15 A, 2 mA, 20 mA, 200 µA, 200 mA

AC voltage measurements: 0-2 V, 20 V, 200 V, 600 V

Capacity measurements: 2 µF, 20 nF, 200 µF, 200 nF, 2000 pF

DC current measurements: 0.2 mA, 15 A, 2 mA, 20 mA, 200 µA, 200 mA

DC voltage measurements: 0-200 mV, 2 V, 20 V, 200 V, 600 V

Frequency measurements: 20 kHz

Resistance measurements: 0-200 Ω, 2 kΩ, 2 MΩ, 20 kΩ, 20 MΩ, 200 kΩ, 200 MΩ

Resistance specifications:

• basic accuracy: ± ( 1.0% rdg +3 digits) for 200 Ohm range, ± (1.0% rdg + 2 digits) for 2 KOhm to 2 Mohm range, ± (1.5% rdg + 3 digits) for 20 MOhm range, ± (5.0% rdg + 5 digits) for 200 MOhm range
• overload protection: 600 VDC or AC rms

Technical data

Safety rating: Cat III / 600 V, Cat IV / 300 V

Voltage tester type: AC / DC

Automatic power-off function: Yes

Pollution degree: 2

Data-hold function: No

Environmental data

IP rating: IPx0

Usage location: Indoor only

Operating temperature °C: 0-40 °C

Operating temperature °F: 32-104 °F

Storage temperature °C: -20-60 °C

Storage temperature °F: -4-140 °F

Maximum storage humidity: Maximum operating humidity: Operational properties

Measuring temperature range °C: -50-800 °C

Range setting: Manual

Power supply

Batteries included: Yes

Number of batteries: 1

Low battery indicator: Yes

Battery composition: Alkaline

Battery IEC size: E (6LR61, 6LP3146, 6F22, 6KR61, 6HR61 ,1604A, 1604D, 1604LC, 7.2H5, 11604, 11604M, PP3, 9-volt, 006P, MN1604)

Included

Set contents: test lead probe : CAT III 1000 V / CAT IV 600 V, 15 A, L = 75 cm

(EN)