| Drilling/milling head | |
|---|---|
| Drill-mill head tilt range | ± 30 ° |
 | Frēzmašīna OPTImill MH 35V6188.05€/ gab.Cena ieskaitot PVN 21%
|
Produkta apraksts
- Control panel with user-friendly, dirt and water-resistant membrane keypad
- Easy to read digital display
- Easy to read quill display in the milling head
- depth stop
- Threading mode
- Right / left rotation
- Rotary pushbutton in the control panel for setting the drilling depth optionally in mm or inch and zero point
- High concentricity due to tapered roller bearing, better than 0.015 mm measured in the quill
- Gear head tiltable ± 30 °
- Manual fine feed
- Adjustable wedges
- Z-axis with lamellar protective cover made of stainless steel
- Height-adjustable protective screen with micro-switch, against flying chips and parts, for maximum protection of the user
- Massive and large-dimensioned XY stage, precisely surface-finished with T-slots
- Heavy, stable and solid column, made of high-quality gray cast iron, with ground and scraped dovetail guide, for high stability and precision
- Optional solid, heavy steel base provides stability
MH 35G:
- Two-stage quality industrial electric motor
MH 35G:
- Gear stages, electronically adjustable
| Drilling/milling output | |
|---|---|
| Max. size milling head | 80 mm |
| Max. size shaft milling cutter | 28 mm |
| Drilling performance steel (S235JR) | 32 mm |
| Continuous drilling performance steel (S235JR) | 28 mm |
| Electrical Data | |
|---|---|
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Milling table horizontal | |
|---|---|
| Table length | 750 mm |
| Table width | 210 mm |
| Max. clearance vertical spindle - milling table | 440 mm |
| T-groove size | 12 mm |
| T-groove number | 3 |
| T-groove spacing | 63 mm |
| Max. load bearing capacity | 170 kg |
| Standards and certifications | |
|---|---|
| Standard | DIN EN 55011 |
| EMC level | C2 |
| Travel | |
|---|---|
| X axis manual | 450 mm |
| Y axis manual | 200 mm |
| Z axis manual | 460 mm |
| Vertical spindle | |
|---|---|
| Reach | 215 mm |
| Spindle chuck | BT 30 |
| Speed range | 50 – 3260 min¯¹ |
| Number of gears | 6 |
| Speed control | electronic |
| Quill diameter | 68 mm |
| Quill stroke | 90 mm |
| VPE | 1 |
| Dimensions and weights | |
|---|---|
| Length approx. | 850 mm |
| Width/depth approx. | 1030 mm |
| Height approx. | 1340 mm |
| Weight approx. | 318 kg |
Parametri
Uzdot jautājumu
Līdzīgas preces
Līdzīgas preces
AKCIJAS / IZDEVĪGI PIEDĀVĀJUMI
VEIKALIEM.LV