Add-On Board, TV HAT For Raspberry Pi, Digital TV Tuner DVB-T2, Network Streaming

This add-on board lets you receive digital DVB-T2 TV streams on your Raspberry Pi to view them or stream them over a network to other devicesShield for Raspberry Pi in version 2 / 3 / 3+ / Zero / Zero W which consists to the tuner of the terrestrial television. It enables the reception of all available, uncoded channels of digital terrestrial television in DVB-T and DVB-T2. It can also stream the signal over the network, to other devices. Performance, when receiving and watching TV, may be different, so it is recommended to use the Raspberry Pi version 2 / 3 / 3+.We've put together a downloadable step-by-step guide to Getting started with the TV HAT, which walks you through the complete setup process.SpecificationTuner: Sony CXD2880Supported standards: DVB-T, DVB-T2Built-in connector: F-type slotReceiving frequencies:VHF IIIUHF IVUHF VChannel capacity:DVB-T2: 1.7 MHz / 5 MHz / 6 MHz / 7 MHz / 8 MHzDVB-T: 5 MHz / 6 MHz / 7 MHz / 8 MHzIt is designed to work with the Raspberry Pi, version 2 / 3 / 3+ / Zero / Zero WOperating systemRaspbian Stretch (or later) is required for using the TV HAT. Download the latest version of Raspbian here.For how to install Raspbian, see our online guide to Getting started with your Pi.SoftwareThe software we recommend for decoding TV streams and viewing content is TVHeadend. Instructions for setting this up are in our  guide to Getting started with the TV HAT.Media player supportKodiOMXplayerLibreELEC

Zīmols:RASPBERRY-PI (LV)