CONSTANT CURRENT LED DRIVER - SINGLE OUTPUT - 350 mA - 12 W

230 VAC only or full range (up to 295 VAC) models available

built-in active PFC function

constant current design

protections: short circuit

cooling by free air convection

fully isolated plastic case

class II power unit, no FG

no load power consumption high reliability, low cost

output:

constant current region: 22 - 36 V

rated current: 0.35 A

no load output voltage: 42 V

rated power: 12.6 W

ripple & noise (max): 5.5 Vp-p

current: ± 5.0%

setup time: 500 ms / 230 VAC at full load

input:

voltage range: 180 - 295 VAC, 254 - 417 VDC

frequency range: 47 - 63 Hz

power factor: PF > 0.95 / 230 VAC, PF > 0.9 / 277 VAC (at full load)

total harmonic: THD 60% at 230 VAC input and output loading > 75% at 277 VAC input

efficiency: 84 %

AC current: 0.08 A / 230 VAC, 0.07 A / 277 VAC

inrush current: cold start 15 A (twidth=50µs measured at 50% Ipeak) at 230 VAC

max. no. of PSUs on 16 A circuit breaker: 160 units (circuit breaker of type B) / 160 units (circuit breaker of type C) at 230 VAC

leakage current: 0.25 mA / 240 VAC

protection:

short circuit: hiccup mode, recovers automatically after fault condition is removed

environment:

working temperature: -30 - +50 °C

working humidity: 20 - 90% RH non-condensing

storage temperature, humidity: -40 - +80 °C, 10 - 95% RH

temperature coefficient: ±0.06% / °C (0 - 50 °C)

vibration: 10 - 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

safety & EMC:

safety standards: ENEC EN61347-1, EN61347-2-13, EN62384, GB19510.14,GB19510.1, IP30 approved

withstand voltage: I/P-O/P:3.75K VAC

isolation resistance: I/P-O/P:100M Ohms / 500 VDC / 25 °C / 70% RH

EMC emission: compliance to EN55015, GB17743, GB17625.1,EN61000-3-2 Class C(>60% load);EN61000-3-3

EMC immunity: compliance to EN61000-4-2,3,4,5,6,8,11;EN61547, light industry level, criteria B(surge 2KV)

others:

MTBF: 808.162K hrs min. MIL-HDBK-217F (25 °C)

dimensions: 145 x 38 x 22 mm (L x W x H)

(EN)