DIGITAL MULTIMETER - CAT III 600 V - 10 A

Product basic info

Instruction manual languages: Dutch, English, French, German, Polish, Portuguese, Spanish

Primary colours: Grey

Additional colours: Red

Depth unit: 40 mm

Height unit: 155 mm

Width unit: 74 mm

Weight unit: 155 g

Material: ABS

Physical properties

Cable length: 0.7 m

Display type: LCD

Backlight: No

Electrical data

AC current:

• basic accuracy: ± (1.5 % rdg + 3 digits) for 0 to 20 mA , ± (2.0 % rdg + 3 digits) for 200 mA, ± (2.5 % rdg + 5 digits) for 10 A
• frequency range: 40 - 500 Hz
• overload protection: 0.5 A / 600 V fuse in uA/mA range; 10 A / 600 V fuse in 10A range
• RMS of sine wave value (Average value)

AC voltage:

• basis accuracy: ± (1.2 % rdg + 3 digits) for 0 to 200 V , ± (1.5 % rdg + 3 digits) for 600 V
• input impedance: 10 MOhm
• RMS of sine wave value (average value)
• overload protection: 600 V DC or AC rms
• frequency range: 40 - 500 Hz

Audible continuity measurement: Yes

Audible continuity: < 50 Ohm built-in buzzer sounds



DC current:

• basic accuracy: ± (1.2 % rdg + 2 digits) for 0 to 20 mA , ± (1.5 % rdg + 2 digits) for 200 mA, ± (2.0 % rdg + 3 digits) for 10 A
• overload protection: 0.5 A / 600 V fuse in µA/mA range; 10 A / 600 V fuse in 10 A range

DC voltage:

• basic accuracy: ± (1.0 % rdg + 2 digits) for 0 to 200 V , ± (1.2 % rdg + 2 digits) for 600 V
• input impedance: 10 MOhm
• overload protection: 600 V DC or AC rms

Diode test: Yes

Diode test specifications: test voltage: approx. 1.8 V



Transistor test: Yes

Transistor test speci:

• hFE: transistor hFE 0-1000
• test voltage: approx. 1.8 V

AC current measurements: 10 A, 20 mA, 200 mA

AC voltage measurements: 0-200 mV, 2 V, 20 V, 200 V, 600 mV

DC current measurements: 0-600 µA, 15 A, 6 A, 60 mA, 600 mA, 6000 µA

DC voltage measurements: 0-200 mV, 2 V, 20 V, 200 V, 600 V

Resistance measurements: 0-200 Ω, 2 kΩ, 2 MΩ, 20 kΩ, 20 MΩ, 200 kΩ

Resistance specifications:

• basic accuracy: ± (1.0% rdg + 3 digits) for 0 to 200 Ohm , ± (1.0 % rdg + 2 digits) for 2 kOhm to 2 mOhm , ± (1.5% rdg + 3 digits) for 20 mOhm
• overload protection: 600 V DC or AC rms
• open circuit voltage: approx. 0.6 V

Technical data

Safety rating: Cat III / 600 V

Voltage tester type: AC / DC

Automatic power-off function: Yes

Data-hold function: Yes

Environmental data

IP rating: IPx0

Usage location: Indoor only

Maximum operating humidity: Operational properties

Number ranges: 23

Range setting: Manual

Power supply

Batteries included: Yes

Number of batteries: 2

Low battery indicator: Yes

Battery composition: Alkaline

Battery IEC size: AAA (LR03, R03, FR03, HR03, KR03, ZR03 ,24A, 24D, 24LF, UM4, Micro, MN2400, MX2400, MV2400)

Included

Set contents: test lead probe : CAT III 600 V - 12 A - 18 AWG - 70 cm



(EN)