Кулер ЦП ARCTIC Liquid Freezer III - 240 A-RGB черный

Liquid Freezer III A-RGB coolers combine the efficient, award-winning Liquid Freezer III PWM pump with new A-RGB fans optimized for static pressure. The Liquid Freezer III series coolers are compatible with Intel (Alder Lake, Raptor Lake LGA1700) and AMD (AM5, AM4) as well as the new Arrow Lake socket LGA1851. It is praised for its performance, price, quietness and aesthetic design.

Features: Liquid Freezer III is multi-compatible with most common Intel and AMD sockets. Intel will release the new Arrow Lake processors on the LGA1851 socket in the future. ARCTIC customers don't need to worry that the new CPUs will also require new coolers. The manufacturer guarantees full compatibility: Liquid Freezer III can be used with the new LGA1851 socket from Intel without limitation.

LGA1851/LGA1700 contact frame: Intel's Independent Loading Mechanism (ILM) deforms the CPU by pressing it into the socket at two points with over 40 kg. This causes pressure in the PCB, the DIE and the solder layer between the DIE and IHS (Integrated Heat Spreader). With high thermal load, this can lead to long-term problems. The mounting frame from ARCTIC does not deform the CPU, reduces the mechanical load on the CPU massively, is quick and easy to install and allows the cooler to be screwed onto the CPU's backplate. As a result, mechanical stress on the mainboard and CPU is minimised, cooling performance remains consistent and installation is quick and uncomplicated.

In independent tests, the Liquid Freezer III clearly stands out from the competition in all price categories, particularly due to its outstanding performance. In noise normalised tests, the Liquid Freezer III shows its true strength, outperforming many competitors with its quiet yet powerful operation. Excellent results of long-term testing allow us to provide a 6-year manufacturer's warranty.

The cooling surface of the 38 mm thick radiator has been extended by 23 % by increasing the fin stack. This not only enables improved heat dissipation, but also a larger liquid volume. Consequently, the heat build-up in the water cooling system is slowed down and power and temperature peaks can be effectively managed over a longer period of time.

The Liquid Freezer III is equipped with a specially developed PWM-controlled water pump, which has been further optimised in terms of both performance and noise. Thanks to the improved coldplate with an extended fin surface and optimised water pipes, the Liquid Freezer III increases its performance while maintaining quiet operation.

The voltage converters of motherboards often work at their maximum temperature in combination with power-hungry CPUs. To compensate the lack of airflow from a tower cooler, the Liquid Freezer III works with a revised VRM fan. The 60 mm PWM-controlled fan enables almost silent cooling of the socket area when VRM cooling is insufficient, in cases with poor airflow or especially in overclocking scenarios. This enables a continuously higher load and a longer service life for the voltage converters.

Two connection cables provide two control options: Like the Liquid Freezer II, this allows the entire unit to be controlled via a single connection, whereby the speed of the radiator fans is output. The pump, VRM and radiator fans can therefore be easily controlled via a single PWM setting. Separate regulation: By using the splitter cable with three separate connections, the pump, VRM fan and radiator fan can be controlled independently of each other. This allows, for example, the speed of the VRM fan to be controlled independently of the CPU and to be adjusted analogue to the temperature of the voltage converters via PWM.

The Liquid Freezer III is ready for immediate use thanks to its pre-installed radiator fans in push configuration. The fan cables are integrated into the jacket of the hoses so that only one cable needs to be connected to the motherboard. With the MX-6 thermal compound included in delivery, you have everything you need for quick and easy installation.

ARCTIC's new A-RGB fans allow for perfectly matched, multi-color lighting effects. With the help of the advanced A-RGB technology and customizable LEDs, you can design your system with your very own look.

Note: Some motherboards are incompatible with the Liquid Freezer III due to oversized SSD coolers in the M.2_1 slot. You can check compatibility here: https://support.arctic.de/lf3-compatibility.

Arctic relies on the well-proven P series fans for better results: Higher static pressure increases cooling efficiency. Extended RPM range. Lower energy consumption. Less vibration. Longer service life. PWM for synchronous fan control. High quality bearing. A-RGB lighting effects.

Specifications: Pump speed: 800 - 2800 RPM. Pump voltage/ current: 12V DC/ 0.35A. Plate material: copper. Tube length: 450mm. Tube diameter: outer 12.4 mm, inner 6.0 mm. VRM fan speed: 400-2500 RPM. VRM voltage/ current: 12V DC/ 0.05A. Thermal compound: MX-6 (0.8g). Fan:2x P12 PWM PST A-RGB. Fan speed: 200-2000 RPM. Air flow: 48.82CFM / 82.91mі/h. Connector: 4-Pin PWM, 3-Pin A-RGB. Cable length: 40mm. Bearing: Fluid dynamic bearing. Fan voltage/ current: 12V DC/ 0.11A. Static pressure: 1.85 mm H2O. LED: 12x A-RGB. RGB voltage/ current: 5V DC/ 0.40A. Dimensions: 277x120x38mm. Weight: 1490g. Color: black body, optional lighting.

Compatibility: AMD AM4. AMD AM5. Intel 1700. Intel LGA1700. Intel LGA1851.

Warranty: 6 years.