| Dimensions and weights | |
|---|---|
| Length approx. | 770 mm |
| Width/depth approx. | 714 mm |
| Height approx. | 917 mm |
| Weight approx. | 99 kg |
 | Frēzmašīna OPTImill MH 20VL2207.02€/ gab.Цена в том числе НДС 21%
|
Описание товара
- Precisely built
- High concentricity due to tapered roller bearings ≤ 0.015 mm measured in the quill
- Motor with two-stage gear ratio for powerful transmission of motor power
- Manual quill feed with fine feed
- Powerful DC motor with permanent current monitoring
- Safety electronics in 24 Volt version
- Control electronics with integrated relay control
- Clear control panel with user-friendly membrane keyboard
- Easy-to-read digital display for speed and drilling depth
- Solid and large dimensioned cross table, precisely finished with T-slots and adjustable wedge strips
- Adjustable end stops
- Stable dovetail guide with adjustable wedge strips
- Emergency stop impact switch
- Drilling and milling head can be tilted by ± 60°
- Fine milling feed
- Forward/reverse rotation
- Machine lamp
- Double-row angular contact ball bearings in the axes, adjustable without play
- Height-adjustable protective screen with microswitch, against flying chips and parts, for the greatest possible protection of the user
- X, Y and Z axes with prepared groove for the subsequent assembly of magnetic tapes
| Drilling/milling head | |
|---|---|
| Mill head swivel range | ± 60 ° |
| Drilling/milling output | |
|---|---|
| Max. size milling head | 52 mm |
| Max. size shaft milling cutter | 20 mm |
| Drilling performance steel (S235JR) | 16 mm |
| Continuous drilling performance steel (S235JR) | 12 mm |
| Electrical Data | |
|---|---|
| Supply voltage | 230 V |
| Mains frequency | 50 Hz |
| Milling table horizontal | |
|---|---|
| Table length | 700 mm |
| Table width | 180 mm |
| T-groove size | 12 mm |
| T-groove number | 3 |
| T-groove spacing | 63 mm |
| Max. load bearing capacity | 50 kg |
| Standards and certifications | |
|---|---|
| Standard | DIN EN 55011 |
| EMC level | C1 |
| Travel | |
|---|---|
| X axis manual | 480 mm |
| Y axis manual | 175 mm |
| Z axis manual | 210 mm |
| Vertical spindle | |
|---|---|
| Reach | 170 mm |
| Spindle chuck | MK 2 |
| Speed range | 100 – 3000 min¯¹ |
| Number of gears | 2 |
| Speed control | electronically adjustable |
| Drive motor output S6-30 % operation | 0,75 kW |
| Quill diameter | 60 mm |
| Quill stroke | 50 mm |
| VPE | 1 |
| Cross table | |
|---|---|
| Clearance vertical spindle - cross table | 255 mm |
Параметры
Задать вопрос
Līdzīgas preces
Līdzīgas preces
АКЦИИ / ВЫГОДНЫЕ ПРЕДЛОЖЕНИЕ
VEIKALIEM.LV