Impulsu barošanas bloks LED Multiple-Stage Mean Well

output current selectable by DIP switches

180-295 VAC input only

built-in active PFC function

protection against: short circuit / overvoltage / over-temperature

cooling: free air convection

fully isolated plastic case

Class II power unit, no FG (frame ground)

built-in 0-10 VDC and PWM signal dimming function

built-in 12 V / 50 mA auxiliary output

IP20

logarithmic or linear dimming curve selectable (meets IEC62386-207)

temperature compensation by external NTC thermistor (not incl.)

no-load power consumption: power supply synchronization function up to 10 units

suitable for indoor LED lighting applications

3 years warranty

Product basic info

Instruction manual languages: English

Primary colours: Grey

Additional colours: Blue

Depth unit: 12.35 cm

Height unit: 2.3 cm

Width unit: 8.15 cm

Weight unit: 240 g

Material: Plastic + PS/LED

Electrical data

Standby power consumption: Environment specifications:

operating temperature: -30 to +60 °C

operating humidity: 20-90 % RH non-condensing

storage: -40 to +80 °C, 10-95 % RH

temperature coefficient: ± 0.03 %/°C (0-50 °C)

vibration: 10-500 Hz, 2G 10 min/1cycle, period for 60 min each along X, Y, Z axes

Functionality specifications:

auxiliary power: 12 V @ 50 mA for driving fan; tolerance ± 5 %

temperature compensation: by external NTC thermistor (not provided with the power supply)

dimming

synchronization

Input specifications:

voltage range: 180-295 VAC 254-417 VDC

frequency range: 47-63 Hz

power factor (typ.): >= 0.975 / 230 VAC; >= 0.96 / 277 VAC at rated power

total harmonic distortion: lower than 20 % when output load is 75 % or higher

efficiency (typ.): 91 %

AC current (typ.): 0.23 A / 230 VAC; 0.2 A / 277 VAC

inrush current (typ.): cold start 20 A (twidth = 260 µs measured at 50 % Ipeak) at 230 VAC

leakage current: < 0.5 mA / 240 VAC

Mean time between failures (MTBF): MTBF: min. 260,600 h; MIL-HDBK-217F (25 °C)

Protection specifications:

short circuit: constant current limiting, recovers automatically after fault condition is removed

overvoltage:

• 110-130 V
• protection type: shut down output voltage, re-power on to recover

over-temperature: shut down output voltage, re-power on to recover

Safety and EMC specifications:

safety standards: UL8750, ENEC EN61347-1, EN61347-2-13, EN62384 independent approved

withstand voltage: input to output: 3.75 kVAC

isolation resistance: input to output: > 100 Mohm / 500 VDC / 25 °C / 70 % RH

EMC emission: compliance to EN55015, EN61000-3-2 Class C (>= 40 % rated power); EN61000-3-3

EMC immunity: compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61547 light industry level (surge 2 kV), criteria A

Technical data

Power rating: 42 W

Dimmable: Yes

Output specifications:

selectable current: 350 mA / 500 mA / 600 mA / 700 mA / 900 mA / 1050 mA

DC voltage range: 2-100 V / 2-80 V / 2-67 V / 2-57 V / 2-45 V / 2-40 V

rated power: 42 W

ripple current: ± 5.0 %

ripple & noise (max.): 700 mVp-p

no-load output voltage (max.): 110 V / 65 V

current accuracy: ± 5.0 %

setup, rise time: 500 ms, 80 ms / 230 VAC at rated power

hold up time (typ.): 16 ms / 230 VAC at rated power

Selectable current: Yes

Set-up options

Dimming type: PWM

Environmental data

Usage location: Indoor only

Operational properties

Power factor correction function (PFC): Yes

(EN)