Manufacturer: | HANTEK |
Body dimensions: | 318x110x150mm |
Operating temperature: | 0...50°C |
Interface: | USB |
Number of channels: | 2 |
Conform to the norm: | CAT II 300V |
Conform to the norm: | EN 61010 |
Input impedance: | 1MΩ/20pF |
Standard equipment: | mains cable |
Standard equipment: | manufacturer's calibration certificate |
Standard equipment: | oscilloscope probe with 10:1 divider |
Standard equipment: | test leads |
Standard equipment: | USB cable |
Measuring instrument features: | automatically measures frequency, period, peak to peak, RMS, MIN, MAX, MEAN values |
Measuring instrument features: | FFT analysis: Hanning, Flattop, Rectangular, Bartletta, Blackman, Hamming |
Measuring instrument features: | mathematical functions: addition, subtraction, division, multiplication and FFT |
Measuring instrument features: | measurements by means of cursors |
Measuring instrument features: | protocols analyse: I2C, SPI, RS232/UART, CAN, LIN |
Sampling: | 1Gsps |
Type of oscilloscope: | digital |
Trigger: | CAN/LIN |
Trigger: | falling-edge |
Trigger: | IIC |
Trigger: | impulse width |
Trigger: | interval |
Trigger: | overtime |
Trigger: | pattern |
Trigger: | rising-edge |
Trigger: | slope |
Trigger: | SPI |
Trigger: | UART |
Trigger: | video signal |
Trigger: | window |
Input coupling: | AC, DC, GND |
Vertical resolution: | 12bit |
Trigger modes: | automatic |
Trigger modes: | normal |
Trigger modes: | single |
Max. input voltage: | 300V |
Manufacturer series: | DSO2000 |
Kind of oscilloscope: | DSO |
Band: | 150MHz |
Rise time: | ≤2.4ns |
Time base: | 2n...1ks/div |
Supply voltage 400Hz: | 100...120V AC |
Software: | included |
Memory record length: | 4Mpts/ch |
Support: | SCPI |
Kind of display used: | colour |
Kind of display used: | LCD TFT 7" |
Supply voltage: | 100...240V AC |