Wiha clamp meter up to 1.000 VAC / 1500 VDC CAT IV (45219)

[youtube]KR0-UyhdWnc[/youtube] When working, for example, on electrical systems that cannot be switched off, current measurement is a major challenge. With the measuring caliper from Wiha, the caliper bracket can be used to carry out measurements without interrupting the electrical circuit. Handling is greatly facilitated by the remote single-hand testing. The test tips allow additional tests, voltage measurement in the AC and DC range, as well as resistance, frequency, and capacity measurements. They also allow continuity and diode tests. This multi-functionality significantly increases the efficiency. A large LCD display with background illumination and data hold function makes the measurement results immediately readable even beyond the measurement process. An additional signal sound indicates the current flow during the continuity check. In addition, the measuring caliper from Wiha has an integrated flashlight function, providing optimal illumination conditions even in poorly lit work environments. The LPF function, coupled with the True-RMS function increase the process safety of your test by providing interference-free effective values. According to the measurement category CAT IV up to 1.000 V the measuring caliper offers maximum safety for working directly on the sources of low-voltage installations.

Simplifies your work:

Large LCD display with background illumination for easy to read measurement results.

An integrated flashlight function ensures optimal illumination.

Increases your safety: Measure live electrical wires without open contacts.

Makes handling easier: Easy one-hand testing without electrical circuit interruption.

Increases your efficiency: All measurement functions relevant for electricians in a single measuring device.

Increases your process reliability: Precise measurement results thanks to LPF and TRUE-RMS measurement.

Application: For multi-functional use in different application locations.

Product basic info

Instruction manual languages: Dutch, English, French, German, Polish, Portuguese, Spanish

Primary colours: Red

Additional colours: Yellow

Depth unit: 43 mm

Height unit: 220 mm

Width unit: 81 mm

Material: ABS

Physical properties

LED light: Yes

Backlight: Yes

Maximum digits display: 3999

Electrical data

Resistance: 5 megohm

Maximum DC current: 400 A

Continuity test: Yes

Frequency: 5 MHz

True rms: Yes

AC current measurements: 0-400 A

AC voltage measurements: 0-1000 V

Capacity measurements: 100 µF

DC voltage measurements: 0-1500 V

Continuity test specifications: < 30 ohm

Maximum AC current: 400 A

Technical data

Safety standard: EN 61010-1

Safety rating: Cat IV / 1000 V

Data-hold function: Yes

Measurement specifications:

• automatic measurement
  • minimum measurement
  • maximum measurement
  • AVG measurement

Power supply

Battery required: Yes

Number of batteries: 2

Input voltage rating VAC range: 0-1000 V

Battery operated: Yes

Battery voltage rating: 3 V

Input voltage rating VDC range: 0-1500 V

Battery composition: Alkaline

Battery IEC size: AAA (LR03, R03, FR03, HR03, KR03, ZR03 ,24A, 24D, 24LF, UM4, Micro, MN2400, MX2400, MV2400)

Extra information

Supplier weblink:

WIHA 

(EN)