ARDUINO® MKR WIFI 1010

The MKR WIFI 1010 is a significant improvement on the MKR 1000 WIFI. It's equipped with an ESP32 module made by U-BLOX. This board aims to speed up and simplify the prototyping of WiFi based IoT applications thanks to the flexibility of the ESP32 module and its low power consumption.

Product basic info

Primary colours: Blue

Additional colours: Black

Depth unit: 25 mm

Width unit: 61.5 mm

Weight unit: 32 g

Material: Epoxy

Technical data

Operating voltage: 3.3 V

Analog input pins: 7

Analog input pins type: ADC 8/10/12 bit

Analog output pins: 1

Analog output pins type: DAC 10 bit

Built-in LED's: 6

Clock speed: 48 MHz

Clock speed RTC: 32768 kHz

DC current per i/o pins: 7 mA

External interrupts: 10

External interrupts type: 1, 16/A1, 17/A2, 4, 5, 6, 7, 8, 9

Flash memory: 256 kB

I2C: 1

PWM pins: 13

PWM pins type: 1, 10, 12, 18/A3, 19/A4, 2, 3, 4, 5, 6, 7, 8

Radio module: u-blox NINA-W102

Secure element: ATECC508

SPI: 1

SRAM: 32 kB

Supported battery: Li-Po Single Cell, 3.7V, 1024mAh Minimum

Microcontroller: SAMD21 Cortex®-M0+ 32bit low power ARM® MCU

UART: 1

Connections

Digital I/O pins: 8

IT connections

USB type: Full speed USB device and embedded host

Power supply

Input voltage rating range: 5 V

(EN)