Drilling/milling head | |
---|---|
Drill-mill head tilt range | ± 30 ° |
Frēzmašīna OPTImill MH 35V6188.05€/ gab.Цена в том числе НДС 21%
|
MH 35G:
MH 35G:
Drilling/milling head | |
---|---|
Drill-mill head tilt range | ± 30 ° |
Drilling/milling output | |
---|---|
Max. size milling head | 80 mm |
Max. size shaft milling cutter | 28 mm |
Drilling performance steel (S235JR) | 32 mm |
Continuous drilling performance steel (S235JR) | 28 mm |
Electrical Data | |
---|---|
Supply voltage | 400 V |
Mains frequency | 50 Hz |
Milling table horizontal | |
---|---|
Table length | 750 mm |
Table width | 210 mm |
Max. clearance vertical spindle - milling table | 440 mm |
T-groove size | 12 mm |
T-groove number | 3 |
T-groove spacing | 63 mm |
Max. load bearing capacity | 170 kg |
Standards and certifications | |
---|---|
Standard | DIN EN 55011 |
EMC level | C2 |
Travel | |
---|---|
X axis manual | 450 mm |
Y axis manual | 200 mm |
Z axis manual | 460 mm |
Vertical spindle | |
---|---|
Reach | 215 mm |
Spindle chuck | BT 30 |
Speed range | 50 – 3260 min¯¹ |
Number of gears | 6 |
Speed control | electronic |
Quill diameter | 68 mm |
Quill stroke | 90 mm |
VPE | 1 |
Dimensions and weights | |
---|---|
Length approx. | 850 mm |
Width/depth approx. | 1030 mm |
Height approx. | 1340 mm |
Weight approx. | 318 kg |
Доступно: 100 102.97 € -+ |