automatic component type identification
automatic pinout identification
special feature identification such as protection diodes and resistor shunts
bipolar transistors: gain and leakage current measurements, silicon and germanium detection
gate threshold measurement for Enhancement Mode MOSFETs
semiconductor forward voltage measurement for diodes, LEDs and
transistor Base-Emitter junctions
automatic and manual power-off
Product basic info
Primary colours: Black
Additional colours: Blue
Depth unit: 20 mm
Height unit: 70 mm
Width unit: 103 cm
Weight unit: 98 g
Technical data
Maximum peak test current into s/c: 5.5 mA
Maximum peak test voltage across o/s: 5.1 V
Diode specs:
- Test current: 5.0 mA
- Voltage accuracy: -2% -20 mV to +2% +20 mV
- Vf for LED identification: 1.50 V - 4.00 V
- Short circuit threshold: 10 Ohm
SCR/triac specs:
- Gate test current: 4.5 mA
- Load test current: 5.0 mA
Transistor specs:
- Gain range (Hfe): 4 - 65000
- Gain accuracy: ± 3 % ± 5 Hfe
- Vceo test voltage: 2.0 V - 3.0 V
- Vbe accuracy: -2 % -20 mV to +2 % +20 mV
- VBE for Darlington (shunted): 0.95 V - 1.80 V (0.75 V - 1.80 V)
- Base-emitter shunt threshold: 50 kOhm - 70 kOhm
- BJT collector test current: 2.45 mA - 2.55 mA
- BJT acceptable leakage: 0.7 mA
- MOSFET:
- Gate threshold range: 0.1 V - 5.0 V
- Threshold accuracy: -2 % -20 mV to +2 % +20 mV
- Drain test current: 2.45 mA - 2.55 mA
- Gate resistance: 8 kOhm
- Depletion drain test current: 4.5 mA
- JFET drain-source test current: 0.5 mA - 5.5 mA
Environmental data
Operating temperature range: 0-50 °C
Power supply
Batteries included: No
Number of batteries: 1
Battery voltage rating: 1.5 V
Battery composition: Alkaline
Battery IEC size: AAA (LR03, R03, FR03, HR03, KR03, ZR03 ,24A, 24D, 24LF, UM4, Micro, MN2400, MX2400, MV2400)
(EN)