DeWALT Instrumentu Komplekts 8gab. 18V XR BL

18V XR BRUSHLESS 8 PIECE KIT - 4 X 5AH

Kit contains the following: Premium Brushless Hammer Drill Driver, Compact Brushless Impact Driver, Brushless Reciprocating Saw, Brushless Body Grip Jigsaw, Brushless Rotary Hammer Drill, Brushless Angle Grinder, Brushless Circular Saw, LED Handheld Area Light, 5.0Ah Batteries, Dual Port Multi-Voltage Charger. ToughSystem Kit Boxes, ToughSystem Trolley

DCD996 Brushless Premium Hammer Drill Driver

The extreme runtime performance (xrp) hammer drill driver from dewalt are a high powered drill suitable for a variety of applications comfortably tackling concrete, metal and wood (when paired with the correct accessories). The DCD996 is lightweight and extremely durable with all metal chucks and the new electronic clutch for maximum control.

The DCD996 18V XRP Hammer Drill Driver is the second generation brushless hammer drill from DEWALT. The DCD996's new, highly efficient motor offers 26% more power than the DCD995. The improved motor design has increased running efficiency resulting in 43% faster speed of application and the enhanced airflow design allows the motor to run at a lower operating temperature. The DCD996's lightweight, ergonomic design, combined with the 3 variable speed settings gives you more accurate control. The DCD996 Hammer Drill also produces 19% more torque.

DCF894 Compact Brushless Impact Driver

The Mid-Range Cordless Impact Wrench with Detent Pin Anvil delivers up to 330 ft-lbs max of fastening torque and a lightweight, ergonomic design. This tool also features Precision Wrench™ Control, which helps to prevent overtightening in forward and fastener run-off in reverse. This Mid-Range Cordless Impact Wrench is ideal for grooved couplings, pipe flanges, wheel lugs, concrete anchor setting, and many other applications where a lot of torque is needed in a compact space.

Includes the new Precision Wrench™ Control feature, which helps add more control when using the tool in forward and reverse. In Forward, the tool will pause before impacting to help prevent overtightening. In Reverse, the tool lowers speed when fastener is loose to help prevent run-off. 3 mode settings to complete a variety of applications. DEWALT-built brushless motor for increased efficiency and runtime vs. brushed modelVariable speed trigger helps to provide speed control. LED light to help illuminate dimly lit areas. Compact and lightweight design for comfort when working in tight spaces.

DCS367 Brushless Recip Saw



The DCS367P1 XR® COMPACT Reciprocating Saw has a compact and lightweight design for making cuts in confined spaces like in between studs. The brushless motor helps to provide up to 2.5x more run time** to get the job done. With a 1-1/8"" stroke length and a variable speed trigger delivering up to 2,900 strokes per minute, this saw is fast and efficient. It also features a keyless, lever-action 4-position blade clamp for quick and easy blade changes in four directions for a variety of applications including flush cutting. A bright LED light is included to illuminate dark work areas.



DCS335 Brushless Body Grip Jigsaw

Cordless Barrel Grip Jig Saw features an efficient motor for powerful performance and extreme runtime. Precisely control blade speed up to 3,200 spm with the variable speed trigger and dial, for professional results no matter what you're cutting. 4-position orbital action lets you adjust for optimal cutting of a variety of materials. A bright LED light illuminates dim work surfaces and makes it easy to follow cut lines. The updated all-metal, lever-action keyless blade clamp is designed for quick and easy blade changes of t-shank jig saw blades. Also keyless, the shoe bevel is easy to adjust with detents at 0°, 15°, 30°, and a positive stop at 45°. A removable shoe cover helps protect materials from scratches, and an integrated dust blower helps remove dust and debris from your line of sight as you cut.

DCH273 Brushless Rotary Hammer

The XR Brushless Rotary Hammer is a high-performance drill powered by a brushless motor and a durable German-engineered mechanism, delivering 2.1 Joules of impact energy. The lightweight design makes this tool ideal for rod hanging, seismic & safety attachments, cable tray & strut mounting, clamp mounting, and rail mounting. It is part of the PERFORM and PROTECT™ product line, integrated with the SHOCKS ACTIVE VIBRATION CONTROL® System and becomes OSHA Table 1 Compliant when used with the DWH303DHOn Board Extractor.

SHOCKS ACTIVE VIBRATION CONTROL System reduces vibration felt by the user at the handles, compared to rotary hammers without this feature. Lightweight design makes this tool ideal for rod hanging, seismic & safety attachments, cable tray & strut mounting, clamp mounting, and rail mounting. Brushless motor and durable German-engineered mechanism for efficient performance and runtime. Rotating Dial to set tool to a specific applicaiton mode - Drill, Hammer Drill, or Chip.

DCG405 Brushless Grinder

The DCG405 is a brushless angle grinder which is powered by DeWalt 18v XR lithium ion batteries. It has a slim and streamlined body with rubber overmoulding for excellent comfort, grip and control, while the compact angled gear head allows improved access to tight spaces. The machine is activated by a side mounted slide switch which has built in restart protection; a No-volt release system resets the switch in the event that the battery becomes depleted or detached while the grinder is in operation, thus ensuring it cannot start up by itself when power is restored. The DCG405 also has an electronic clutch and fast action brake, helping to safeguard against kickback or disc bursts and bringing spinning accessories to a rapid halt in under 2 seconds.

The DeWalt brushless motor provides high efficiency operation and in conjunction with a 5.0ah XR battery enables the operator to make 69 cuts through 1/2"" steel rebar on a single charge.

DCS570 Brushless Circular Saw

This Circular Saw gives you the power and depth-of-cut of a corded circular saw, but with the portability and convenience of cordless. DEWALT brushless motor technology delivers excellent performance and runtime when cross cutting 2x material and ripping sheet goods.

Power - Brushless motor provides 5500RPM maintaining speed under load. Runtime - 330 crosscuts in 2x4 (pine). Capacity - 7-1/4"" Blade provides 2-9/16"" Cutting Capacity at 90 degrees. Ease of Use - Bevel capacity up to 57 degrees for increased versatility.

DCL050 LED Handheld Area Light

Illuminate dark jobsite work areas with the DCL050 LED Hand Held Area Light. High 1000 Lumens and low 500 Lumens brightness settings. 140 degree pivoting head provides versatility for lighting work surfaces. Built-in telescoping and 360-degree rotating hook allows unit to hang from 2 in. materials and multiple locations. Over-molded lens cover provides increased durability and a non-marring surface for the jobsite. Belt hook compatible - add belt hook accessory to provide increased versatility for transportation. 

DCB184 5.0Ah Batteries x4

Lightweight design provides the user with upgraded 5Ah Power without increasing the size or weight over the 18V 3Ah battery pack. Compatible with all DEWALT XR Li-Ion 18V Tools

LED State of Charge Indicator helps manage pack charging. No memory effect. Protection against overheat, overload and deep discharge conditions increases battery life. Excellent electrical characteristics.

DCB132 Dual Port Multi-Charger

The DCB132 is compatible with voltages ranging between 10.8V, 12V, 18V and 54V XR FLEXVOLT. It’s also capable of charging 2 batteries at the same time, at the same rate, thanks to its dual charging ports. The DCB132 parallel charges batteries at a simultaneous output current of 4 Amps each and is capable of fully charging a 54V XR FLEXVOLT battery in just 60 minutes. You can keep track of the batteries’ charge status with a diagnostic LED indicator. Weighing only 1.2kg, the DCB132 charger can be transported between jobsites with ease and is also wall mountable, allowing for practical access at all times. 

DS150 Tough System Kit Box

The ToughSystem® DS150 Small Case is the ideal tool storage unit, featuring a durable and thick structural foam box wall in addition to the integrated water seal and central locking mechanism. This case is compatible with the entire ToughSystem® storage line.

XDS300 Tough System Kit Box

Part of the ToughSystem range, the DS300 provides an ample 30L capacity — enough space for a typical day’s worth of power tools, hand tools and accessories. Designed to withstand tough jobsite environments, it’s made from reinforced structural foam and is IP65 rated against water and dust ingress. With a spacious 30L of storage capacity, the DS300 is large enough to store power tools, hand tools and accessories. A removable divider tray and a vertical organiser make it easy to separate and access different tools. A pressure relief valve equalises pressure inside the kitbox for use in extreme weather conditions, while an IP65 rating protects it from water and dust ingress. Heavy-duty metal latches and hinges and a 4mm reinforced polypropylene protect your tools from high impact knocks. A bi-material carry handle provides a comfortable grip, while a padlock eye ensures lockable security. As part of the ToughSystem range, the kitbox can be used with other modules to create a storage system that’s customisable and maneuverable around the toughest jobsites.

WHAT'S INCLUDED

• 1 X DCD996 Brushless Premium Hammer Drill Driver
• 1 X DCF894 Compact Brushless Impact Driver
• 1 X DCS367 Brushless Recip Saw
• 1 X DCS335 Brushless Body Grip Jigsaw
• 1 X DCH273 Brushless Rotary Hammer
• 1 X DCG405 Brushless Grinder
• 1 X DCS570 Brushless Circular Saw
• 1 X DCL050 LED Handheld Area Light
• 4 X DCB184 5.0Ah Batteries 
• 1 X DCB132 Dual Port Multi-Charger
• 1 X DS150 Tough System Kit Box
• 1 X Toughsystem Trolley
• 2 X DS300 Tough System Kit Box