Filtrēšanas materiāls ECOMIX P 25 litri

Download Ecomix® P:

will get rid of plaque on plumbing fixtures and scale on heating elements;

will remove the metallic taste of water;

will eliminate the unpleasant smell of water.



Main advantages:

— Solving the main water problems in one filter, instead of 2

— Stable quality of purified water throughout the entire service life.

— Low salt consumption for regeneration.



Where is it used?

Ecomix® P is used in household and industrial Ecosoft FK filters. Ecomix is loaded into the filter as a mixture, and during the first regeneration it is divided into 4 layers. For regeneration, ordinary tableted salt is used.



Active components of Ecomix® filter material:

1. Inert material - improves backwashing.

2. FerroSorb sorbent reduces the content of iron and manganese.

The mechanism for reducing iron content consists of adsorption (fixation) on the surface of the material, oxidation, formation of an active layer and autocatalytic oxidation. As a result, the content of all main forms of iron decreases: dissolved, oxidized, organic and colloidal.

The best iron and manganese removal efficiency is achieved when well water is applied directly to the Ecomix material.

3. Ion exchange resin (cationite) - softens water.

In the process of filtering water through a cation resin, the hardness ions Ca2+ and Mg2+ are replaced with Na+ ions. During regeneration, calcium and magnesium ions are washed into the drain, and the cation exchanger is saturated with sodium ions from the saline solution.

4. Quartz sand serves to uniformly distribute the water flow through the filter media during its washing.



Regeneration of Ecomix® filter material:

During operation, the filter material is periodically regenerated with a salt solution, just like a conventional ion exchange resin.



— Calcium and magnesium ions are replaced by sodium ions during the regeneration stage with saline solution.

— Iron and manganese compounds are removed due to surface friction of FerroSorb grains in a fluidized bed during backwashing.



Maximum operating temperature: 40 °C

Filtration speed: 20–25 m/hour

Backwash speed: 10–15 m/hour

Brine washing speed: 3–5 m/hour



Minimum layer height: 500 mm

Optimal layer height: 800 mm

Free volume: more than 40%

Salt consumption: 100 g/l of material

Brine concentration: 8–10%

Water consumption for washing: less than 10 l/l of material

Working exchange capacity for hardness salts: 0.8 g-eq/l