INDUCTIVE PROXIMITY SENSOR DETECTION SWITCH18.36€/ gab.Cena ieskaitot PVN 21%
|
The Whadda inductive proximity sensor detection switch accurately detects metal objects that are within 4 mm of the sensor head. When a metal object is detected, the built-in red LED lights up and the black signal wire is internally shorted to ground through an NPN transistor. When no object is detected, the signal is floating/high impedance.
Note: It is recommended to supply the sensor with no more than 6 V, and to put a series protection resistor between the signal output of the sensor and digital input of your board when connected to 5 V logic, such as Arduino® compatible boards.
Product basic info
Instruction manual languages: English
Primary colours: Black
Additional colours: Blue, Grey
Additional detailed colours: Metal
Depth unit: 3.5 cm
Height unit: 15.5 cm
Width unit: 7.5 cm
Weight unit: 69 g
Technical data
Specifications kits & modules:
Vienības svars: | 0.078 kg |
---|---|
Minimālais pasūtījums: | 1 |
Ir pieejams: 200 1.86 € -+ |