ITE COMPACT SWITCHING POWER SUPPLY - SINGLE OUTPUT - 12 VDC - 3A - 36 W

universal AC input / full range

no load power consumption ErP Step 2 compliant

meets EISA 2007 (Energy Independence and Security Act)

2-pole Europlug

Class II (without earth pin)

protection against: short circuit / overload / overvoltage

fully enclosed in plastic case

approvals: TÜV / CB / CE

meets LPS requirements

2 years warranty

stabilised output, low ripple & noise

short-circuit & overload protection

very high efficiency & low energy consumption

output:

output voltage: 12 VDC

rated current: 3 A

max. output current: 0 - 3 A

power: 36 W

ripple & noise (max.): 100 mVp-p

voltage tolerance: +/- 3.0 %

line regulation: +/- 1 %

load regulation: +/- 3 %

setup, rise, hold up time:

1000 ms, 20 ms, 15 ms / 230 VAC

1000 ms, 20 ms, 15 ms / 115 VAC at full load

input:

voltage range:

90 - 264 VAC

135 - 370 VDC

frequency range: 47 - 63 Hz

efficiency (typ.): 87.5 %

AC current (typ.): 0.7 A / 100 VAC

inrush current (typ.): 70 A / 230 VAC

leakage current: 0.25 mA / 240 VAC

protection:

overload:

110 - 150 % rated output power

protection type (overload): hiccup mode, recovers automatically after fault condition is removed

overvoltage:

110 - 140 % rated output voltage

protection type (overvoltage): clamping by zener diode

environment:

operating temperature: -30 to +70 °C

operating humidity: 20-90 % RH non-condensing

storage: -40 to +85 °C, 10 - 95 % RH

temperature coefficient: +/- 0.03 %/°C (0 - 50 °C)

vibration: 10 - 500 Hz, 2G 10 min/1 cycle, period for 60 min each along X, Y, Z axes

safety & EMC:

safety standards: TÜV EN60950-1 approved

withstand voltage: input to output: 4242 VDC

isolation resistance: input to output: 100 Mohm / 500 VDC / 25 °C / 70 % RH

EMC emission: compliance to EN55032 Class B; EN61000-3-2,3 Class A

EMC immunity: compliance to EN61000-4-2,3,4,5,6,8,11

others:

MTBF: min. 692,300 h, MIL-HDBK-217F (25 °C)

dimensions (L x W x H): 79 x 54 x 33 mm

weight: 209 g

plug: ID 2.1 x OD 5.5 mm

cable length: 1 m

temperature: -30 °C to +50 °C

output voltage tolerance: ± 10 %

(EN)