| Bending performances profile type standard | |
|---|---|
| Square material dimensions [1] | 20 mm |
| Square material min. bending Ø [1] | 500 mm |
| Square material dimensions [2] | 10 mm |
| Square material min. bending Ø [2] | 160 mm |
| Flat material light axis dimensions bending Ø [1] | 50 x 10 mm |
| Flat material light axis min. bending Ø [1] | 400 mm |
| Flat material light axis dimensions bending Ø [2] | 40 x 5 mm |
| Flat material light axis min. bending Ø [2] | 160 mm |
| Flat material heavy axis dimensions bending Ø [1] | 30 x 10 mm |
| Flat material heavy axis min. bending Ø [1] | 500 mm |
| Flat material heavy axis dimensions bending Ø [2] | 20 x 5 mm |
| Flat material heavy axis min. bending Ø [2] | 190 mm |
| UPN profile top rib dimensions [1] | 35 x 4.5 mm |
| T profile top rib min. bending Ø [1] | 600 mm |
| UPN profile top rib dimensions [2] | 30 x 4 mm |
| T profile top rib min. bending Ø [2] | 400 mm |
| Explanation for T profile rib above | Additional spacers may be required |
| UPN profile outside rib dimensions [1] | 35 x 4.5 mm |
| T profile outside rib min. bending Ø [1] | 600 mm |
| UPN profile outside rib dimensions [2] | 30 x 4 mm |
| T profile outside rib min. bending Ø [2] | 400 mm |
| UPN profile inside rib dimensions [1] | 35 x 4.5 mm |
| T profile inside rib min. bending Ø [1] | 600 mm |
| UPN profile inside rib dimensions [2] | 30 x 4 mm |
| T profile inside rib min. bending Ø [2] | 400 mm |
| UPN profile outside leg dimensions [1] | U40x20 mm |
| UPN profile outside leg min. bending Ø [1] | 700 mm |
| UPN profile outside leg dimensions [2] | U30 mm |
| UPN profile outside leg min. bending Ø [2] | 500 mm |
| UPN profile inside leg dimensions [1] | U40x20 mm |
| UPN profile inside leg min. bending Ø [1] | 700 mm |
| UPN profile inside leg dimensions [2] | U30 mm |
| Inside leg min. bending Ø [2] | 500 mm |
| Explanations for bending performance, profile type standard | The performance data apply to material with a max. Yield strength of 24kg / mm². Bending power at VA: factor 0.7 |
 | Profilu liecējs PRM 10 E2426.20€/ gab.Cena ieskaitot PVN 21%
|
Produkta apraksts
- for round bending of square material
- stable construction, fixable to the ground
- Drive the two lower rollers by means of a hand crank
- Rolls hardened and ground
- Steel shafts, hardened and ground
- Delivery via upper roller
PRM 10 E
- motor design
- horizontal and vertical work possibility
- powerful 400Volt engine
- Left / right rotation by foot pedal
| Dimensions and weights | |
|---|---|
| Length approx. | 700 mm |
| Width/depth approx. | 700 mm |
| Height approx. | 1400 mm |
| Weight approx. | 230 kg |
| Electrical Data | |
|---|---|
| Supply voltage | 400 V |
| Machine data | |
|---|---|
| Shaft diameter top | 30 mm |
| Shaft diameter bottom | 30 mm |
| Roller diameter top | 98 mm |
| Roller diameter bottom | 118 mm |
| Speed | 2.5 m/min |
| VPE | 1 |
| Bending performances profile type optional | |
|---|---|
| Square tube dimensions [1] | 30 x 2 mm |
| Square tube min. bending Ø [1] | 900 mm |
| Square tube dimensions [2] | 20 x 2 mm |
| Square tube min. bending Ø [2] | 600 mm |
| Square tube heavy axis dimensions bending Ø [1] | 38 x 20 x 2 mm |
| Square tube heavy axis min. bending Ø [1] | 1000 mm |
| Square tube heavy axis dimensions bending Ø [2] | 30 x 15 x 1.5 mm |
| Square tube heavy axis min. bending Ø [2] | 600 mm |
| Round tube dimensions [1] | 25.4 x 2 mm |
| Round tube min. bending Ø [1] | 800 mm |
| Round tube dimensions [2] | 19.05 x 1.5 mm |
| Round tube min. bending Ø [2] | 400 mm |
| Round profile dimensions [1] | 27 mm |
| Round profile min. bending Ø [1] | 500 mm |
| Round profile dimensions [2] | 17 mm |
| Round profile min. bending Ø [2] | 160 mm |
| isosceles angle profile outside dimensions [1] | 35 x 35 x 4 mm |
| isosceles angle profile outside leg min. bending Ø [1] | 800 mm |
| isosceles angle profile outside dimensions [2] | 30 x 30 x 4 mm |
| isosceles angle profile outside leg min. bending Ø [2] | 400 mm |
| isosceles angle profile inside dimensions [1] | 35 x 35 x 4 mm |
| isosceles angle profile inside leg min. bending Ø [1] | 800 mm |
| isosceles angle profile inside dimensions [2] | 30 x 30 x 4 mm |
| isosceles angle profile inside leg min. bending Ø [2] | 400 mm |
| Explanations for bending performance, profile type optional | The performance data apply to material with a max. Yield strength of 24kg / mm². Bending power at VA: factor 0.7 |
Parametri
Uzdot jautājumu
Līdzīgas preces
Līdzīgas preces
AKCIJAS / IZDEVĪGI PIEDĀVĀJUMI
VEIKALIEM.LV