| Electrical Data | |
|---|---|
| Supply voltage | 230 V |
| Mains frequency | 50 Hz |
 | Virpa metālam OPTIturn 2807VB4162.75€/ gab.Cena ieskaitot PVN 21%
|
Produkta apraksts
- Precise processing
- Powerful, maintenance-free engine
- Heavily ribbed prism bed made of gray cast iron, inductively hardened and precision ground
- Smooth-running feed gear with rounded gears running in an oil bath
- Hardened and ground Z-axis guideway
- Guaranteed concentricity of the spindle nose better than 0.009 mm
- Concentricity on the lathe chuck better than 0.04 mm
- Automatic longitudinal / lead screw drive
- Lead screw for thread cutting or automatic longitudinal turning
- Quadruple tool holder
- All guides can be adjusted by wedge strips
- Right / left rotation in the control panel switchable
- Hardened main spindle mounted in adjustable precision tapered roller bearings
- Tapered roller bearings in P5 quality
- Hardened spindle nose with Ø 26 mm spindle bore
- Rolled trapezoid spindles
- Chip protection on the upper slide
- Upper slide on cross slide slidable
- Tailstock for taper turning ± 5 mm adjustable
- Tailstock quill and handwheel with adjustable fine scale 0.02 mm
- Fast, easy and tool-free adjustment by means of a clamping lever
- Leadscrew stored in two sintered bearings
- Change gear set in standard scope of supply for thread cutting
- Handwheels on the carriage with adjustable fine scale 0.04 / 0.01 mm
- thrust bearing
- 3-jaw lathe chuck in the standard scope of delivery
- Emergency stop impact switch
- Fully equipped, allowing the user to be productive immediately after commissioning
- Speed change easily adjustable via potentiometer
- Digital speed display
- EMC filter class C1
| Feed | |
|---|---|
| Longitudinal feed range | 0,07 – 0,4 mm/rev |
| Number of longitudinal feeds | 6 |
| Pitches | |
|---|---|
| Metric pitch | 0,2 – 3,5 mm/rev |
| Number of metric pitches | 18 |
| Imperial pitch | 56 – 8 Gg/1" |
| Number of imperial pitches | 21 |
| Speed range | |
|---|---|
| Number of gears | 2 |
| Speed range | 150 – 2500 min¯¹ |
| Speed control | electronically adjustable |
| Spindle | |
|---|---|
| Spindle chuck | short taper |
| Spindle bore/rod passage diameter | 26 mm |
| Spindle cone | MT 4 |
| Tool holder max. chuck height | 12 mm |
| Tailstock | |
|---|---|
| Chuck | MK 2 |
| Quill stroke | 85 mm |
| Quill diameter | 30 mm |
| Travel | |
|---|---|
| Travel upper slide | 60 mm |
| Travel cross slide | 160 mm |
| Travel carriage saddle | 580 mm |
| Work areas | |
|---|---|
| Max. height | 140 mm |
| Max. width | 700 mm |
| Swing diameter above machine bed | 266 mm |
| Swing diameter above planing slide | 170 mm |
| Bed width | 180 mm |
| VPE | 1 |
| Dimensions and weights | |
|---|---|
| Length approx. | 1370 mm |
| Width/depth approx. | 660 mm |
| Height approx. | 440 mm |
| Weight approx. | 188 kg |
Parametri
Uzdot jautājumu
Līdzīgas preces
Līdzīgas preces
AKCIJAS / IZDEVĪGI PIEDĀVĀJUMI
VEIKALIEM.LV