| Electrical Data | |
|---|---|
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
 | Virpa metālam OPTiturn TH 33097669.09€/ gab.Cena ieskaitot PVN 21%
|
Produkta apraksts
- Hardened and ground Z-axis guideway
- Spindle mount Camlock DIN ISO 702-2 No. 4
- Precisely crafted sled
- Handwheels with adjustable fine scale 0.04 / 0.02 mm
- Quadruple tool holder
- All guides can be adjusted by wedge strips
- Main spindle running in oil bath
- Gear wheels smooth, hardened and ground
- Adjustment range upper slide ± 90 °
- Guaranteed concentricity of the spindle nose better than 0.015 mm
- Handwheels decoupled and tested according to EN 23125
- Safety handwheels with release function in the X and Z axis
- Two-channel right-left switch tested to EN 23125
- DC 24 volt electrical system with two-channel safety circuit according to EN 23125
- Lathe chuck protection tested according to EN 23125
- Switch with life cycle calculation, tested according to EN ISO 13849
- Lockable main switch
- Right / left rotation on bed sled switchable
- Leading spindle
- Tailstock for taper turning ± 10 mm adjustable
- Tailstock quill and handwheel with adjustable fine scale 0.02 mm
- Fast, easy and tool-free adjustment by means of a clamping lever
- Strongly ribbed prism bed, induction hardened and precision ground
- Machine base with tool compartment on the right side (left side with 3 panels (no compartments))
- Extractable chip tray with guide rails
- Emergency stop device with foot control
- LED machine lamp integrated in chip protection
| Feed | |
|---|---|
| Longitudinal feed range | 0,052 – 1,392 mm/rev |
| Number of longitudinal feeds | 32 |
| Flat feed range | 0,014 – 0,38 mm/rev |
| Number of flat feeds | 32 |
| Pitches | |
|---|---|
| Metric pitch | 0,4 – 7 mm/rev |
| Number of metric pitches | 26 |
| Imperial pitch | 56 – 4 Gg/1" |
| Number of imperial pitches | 34 |
| Speed range | |
|---|---|
| Number of gears | 16 |
| Speed range | 70 – 2000 min¯¹ |
| Spindle | |
|---|---|
| Spindle chuck | Camlock DIN ISO 702-2 No. 4 |
| Spindle bore/rod passage diameter | 38 mm |
| Spindle cone | MK 5 |
| Tool holder max. chuck height | 16 mm |
| Tailstock | |
|---|---|
| Chuck | MK 3 |
| Quill stroke | 110 mm |
| Quill diameter | 32 mm |
| Travel | |
|---|---|
| Travel upper slide | 98 mm |
| Travel cross slide | 164 mm |
| Travel carriage saddle | 695 mm |
| Work areas | |
|---|---|
| Max. height | 165 mm |
| Max. width | 830 mm |
| Swing diameter above machine bed | 330 mm |
| Swing diameter above planing slide | 208 mm |
| VPE | 1 |
| Dimensions and weights | |
|---|---|
| Length approx. | 1685 mm |
| Width/depth approx. | 745 mm |
| Height approx. | 1320 mm |
| Weight approx. | 510 kg |
Parametri
Uzdot jautājumu
Līdzīgas preces
Līdzīgas preces
AKCIJAS / IZDEVĪGI PIEDĀVĀJUMI
VEIKALIEM.LV