| Electrical Data | |
|---|---|
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
 | Virpa metālam OPTiturn TH 401014762.88€/ gab.Cena ieskaitot PVN 21%
|
Produkta apraksts
- Hardened and ground Z-axis guideway
- Spindle mount Camlock DIN ISO 702-2 No. 5
- Precisely crafted sled
- Handwheels with adjustable fine scale 0.04 / 0.02 mm
- Quadruple tool holder
- All guides can be adjusted by wedge strips
- Adjustment range upper slide ± 90 °
- Guaranteed concentricity of the spindle nose better than 0.015 mm
- Main spindle running in oil bath
- Gear wheels smooth, hardened and ground
- Gears and shafts hardened and ground, running in an oil bath in precision bearings
- Handwheels decoupled and tested according to EN 23125
- Two-channel right-left switch tested to EN 23125
- Switch with life cycle calculation, tested according to EN ISO 13849
- DC 24 Volt - electrics
- Lockable main switch
- Right / left rotation on bed sled switchable
- Safety handwheels with release function in the X and Z axis
- Tailstock for taper turning ± 10 mm adjustable
- Tailstock quill and hand wheel with adjustable fine scale 0.025 mm
- Fast, easy and tool-free adjustment by means of a clamping lever
- Strongly ribbed prism bed, induction hardened and precision ground from gray cast iron
- Extractable chip tray with guide rails
- Emergency stop device with foot control
- Machine base with 3 panels (no compartments)
- Coolant system
- LED machine lamp in chip protection
TH 4010 / TH 4010D:
- Motor protection switch
| Feed | |
|---|---|
| Longitudinal feed range | 0,043 – 0,653 mm/rev |
| Number of longitudinal feeds | 48 |
| Flat feed range | 0,015 – 0,206 mm/rev |
| Number of flat feeds | 48 |
| Pitches | |
|---|---|
| Metric pitch | 0,4 – 7 mm/rev |
| Number of metric pitches | 42 |
| Imperial pitch | 70 – 4 Gg/1" |
| Number of imperial pitches | 42 |
| Speed range | |
|---|---|
| Number of gears | 16 |
| Speed range | 45 – 1800 min¯¹ |
| Spindle | |
|---|---|
| Spindle chuck | Camlock DIN ISO 702-2 No. 5 |
| Spindle bore/rod passage diameter | 52 mm |
| Spindle cone | MT 6 |
| Tool holder max. chuck height | 20 mm |
| Tailstock | |
|---|---|
| Chuck | MK 3 |
| Quill stroke | 130 mm |
| Quill diameter | 45 mm |
| Tool clamping | |
|---|---|
| Tool holder chuck size | 16 mm |
| Travel | |
|---|---|
| Travel upper slide | 100 mm |
| Travel cross slide | 195 mm |
| Travel carriage saddle | 750 mm |
| Work areas | |
|---|---|
| Max. height | 205 mm |
| Max. width | 1000 mm |
| Swing diameter above machine bed | 410 mm |
| Swing diameter above planing slide | 255 mm |
| Bed width | 206 mm |
| VPE | 1 |
| Dimensions and weights | |
|---|---|
| Length approx. | 1920 mm |
| Width/depth approx. | 740 mm |
| Height approx. | 1222 mm |
| Weight approx. | 735 kg |
Parametri
Uzdot jautājumu
Līdzīgas preces
Līdzīgas preces
AKCIJAS / IZDEVĪGI PIEDĀVĀJUMI
VEIKALIEM.LV