Arguments convincing in quality, performance and price
- Machine bed made of heavily ribbed cast iron
- One-piece machine base made of steel
- High rigidity of the headstock housing thanks to heavily ribbed 25GG cast iron
- Precisely crafted slide
- Shafts on needle bearings, all components are lubricated in oil bath
- Bed guides hardened and precision ground
- All electronic controls can be reached centrally
- All gear wheels of the feed gear made of steel, hardened and ground
- Handwheels decoupled and tested according to EN 23125
- Two-channel right-left switch tested according to EN 23125
- Switch with life cycle calculation, tested according to EN ISO 13849
- Coolant system with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN
- Complete master and traction spindle cover
- Complete illumination of the work area
- Service-friendly removable rear wall
- Hardened and ground plane spindle ensures enormous accuracy and durability
- Due to the great cutting performance, high chip removal is no problem during roughing
- Energy chain for gentle cable and hose routing
- Lockable chip protection moves with the bed sled with integrated position indicator and coolant hose, can be moved manually
- No change gears necessary
- With safety device against simultaneous operation of the threading and feed mechanism
- Electronic feed cut-off of the Z-axis
- Electrical position shutdown with fourfold position stop
- Standard three-jaw lathe chuck
- Quick-change steel holder SWH 7C
- Steel holder 32 x 130 type D for square chisel 25 mm
| Cooling lubricant system |
|---|
| Coolant pump output | 100 W |
| Dimensions and weights |
|---|
| Length approx. | 3016 mm |
| Width/depth approx. | 1195 mm |
| Height approx. | 1860 mm |
| Weight approx. | 2470 kg |
| Electrical connections |
|---|
| Total rated value | 5.5 kW |
| Electrical Data |
|---|
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Feed |
|---|
| Longitudinal feed range | 0,05 – 1,5 mm/rev |
| Number of longitudinal feeds | 55 |
| Flat feed range | 0,025 – 0,75 mm/rev |
| Number of flat feeds | 55 |
| Pitches |
|---|
| Metric pitch | 0,5 - 15 mm/rev |
| Number of metric pitches | 55 |
| Imperial pitch | 60 – 2 Gg/1" |
| Number of imperial pitches | 55 |
| Diametrical pitch | 120 – 4 Gg/π |
| Number of diametrical pitches | 55 |
| Modular thread pitch | 0,25 – 7,5 mm x π |
| Number of modular thread pitches | 55 |
| Speed range |
|---|
| Number of gears | 2 x 3 Steps |
| Speed range | 12 – 1800 min¯¹ |
| Spindle |
|---|
| Spindle chuck | Camlock DIN ISO 702-2 No. 8 |
| Spindle bore/rod passage diameter | 80 mm |
| Spindle cone | MT 7 |
| Tool holder | SWH 7C |
| Tailstock |
|---|
| Chuck | MK 5 |
| Quill stroke | 180 mm |
| Quill diameter | 72 mm |
| Travel |
|---|
| Travel upper slide | 170 mm |
| Travel cross slide | 350 mm |
| Travel carriage saddle | 1400 mm |
| Work areas |
|---|
| Max. height | 260 mm |
| Max. width | 1600 mm |
| Swing diameter above machine bed | 520 mm |
| Swing diameter above planing slide | 324 mm |
| Bed width | 350 mm |
VEIKALIEM.LV