| Dimensions and weights | |
|---|---|
| Length approx. | 1960 mm |
| Width/depth approx. | 1060 mm |
| Height approx. | 1690 mm |
| Weight approx. | 1250 kg |
 | Virpa metālam OPTiturn TZ 421656.45€/ gab.Cena ieskaitot PVN 21%
|
Produkta apraksts
- Hardened and ground Z-axis guideway
- Partial covering with entrained, large-dimensioned chip protection
- Chip protection with integrated position indicator, coolant hose and additional control panel
- Plan and upper slide spindle is hardened and ground and adjustable via split spindle nut
- Guide and feed shaft cover
- Fine graded feed and thread cutting area
- LED machine lamp for complete illumination of the working area
- Energy chain for gentle line and hose routing
- Change wheels optionally also available for inch and module threads
- Control cabinet with 24 V DC power supply
- Switch with life cycle calculation tested according to EN ISO 13849
- Decoupled handwheels tested to EN 23125
- Two-channel right-left switch tested to EN 23125
- All contactors and relays from Siemens or Schneider
- Safety handwheels with release function in the X and Z axis
- Forward removable chip tray
- Quick change steel holder SWH 5-B
- Steel holder 25 x 120 type D for square chisel 20 mm
- Digital position indicator NEWALL DP 700
TZ 4:
- Reduction of the deceleration time of the main spindle by electrically braked motor
- Motor protection switch
| Electrical connections | |
|---|---|
| Total rated value | 6 kW |
| Electrical Data | |
|---|---|
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Feed | |
|---|---|
| Longitudinal feed range | 0,0263 – 1,8416 mm/rev |
| Number of longitudinal feeds | 48 |
| Flat feed range | 0,0133 – 0,9321 mm/rev |
| Number of flat feeds | 48 |
| Pitches | |
|---|---|
| Metric pitch | 0,2 – 14 mm/rev |
| Number of metric pitches | 26 |
| Imperial pitch | 80 – 1 Gg/1" |
| Number of imperial pitches | 42 |
| Diametrical pitch | 3 – 200 Gg/π |
| Number of diametrical pitches | 33 |
| Modular thread pitch | 0,1 – 7 mm/rev |
| Number of modular thread pitches | 44 |
| Speed range | |
|---|---|
| Number of gears | 16 |
| Speed range | 45 – 1800 min¯¹ |
| Spindle | |
|---|---|
| Spindle chuck | DIN ISO 702-1 No. 5 Form A2 |
| Spindle bore/rod passage diameter | 52 mm |
| Spindle cone | MT 6 |
| Chuck passage diameter | 52 mm |
| Tailstock | |
|---|---|
| Chuck | MK 3 |
| Quill stroke | 110 mm |
| Quill diameter | 50 mm |
| Travel | |
|---|---|
| Travel upper slide | 112 mm |
| Travel cross slide | 212 mm |
| Travel carriage saddle | 800 mm |
| Work areas | |
|---|---|
| Max. height | 200 mm |
| Max. width | 800 mm |
| Swing diameter above machine bed | 400 mm |
| Swing diameter above planing slide | 245 mm |
| Bed width | 260 mm |
| VPE | 1 |
| Cooling lubricant system | |
|---|---|
| Coolant pump output | 0.125 kW |
Parametri
Uzdot jautājumu
Līdzīgas preces
Līdzīgas preces
AKCIJAS / IZDEVĪGI PIEDĀVĀJUMI
VEIKALIEM.LV